SDG Volumen HV 350 KT

The multi-functional BDF
swap body system

SDG Volumen HV 350 KT is designed for the transportation of volume swap bodies with a maximum height of 3150mm. The arms are flange-mounted and allow the pick-up of containers with an adjustable height up to 970mm. Thanks to the integrated height adjustment, additional loading heights of 970 to 1320mm can be achieved.
{"autoplay":"true","autoplay_speed":"3000","speed":"300","arrows":"false","dots":"false","rtl":"false"}

Suitable container sizes
and loading heights

Chassis base Low frame
Tires 315/60 R 22,5
Low coupling yes
Loading heights 970 - 1320 mm
Container lengths C 7.150 - C 7.820
Corner height max. 3150 mm
Tail lift capable according to technical verification


Conception:

Divided swap frame in modular design, for transportation of volume swap bodies with a maximum corner height, as well as short-coupled use of centre-axle trailers up to 18t. Allows transportation of standardized swap containers according to DIN EN 284 for picking up standardized container lengths C 7.150 – C 7.820 and parking heights 970-1320mm. 4 flange-mounted arms HUB 120/350mm and height-adjustable middle supports, wear liners in frame middle.

Surface:

Enduring and high-quality corrosion protection through hot-dip galvanizing of any attachments. Middle supports galvanized and additionally coated in signal yellow.

Locking:

Solid flange-mounted arms with height-adjustable and pneumatic spring supported interlocking devices HUB 120/350mm. Interlocking through 4 pivots. Central front stop C 7.820, with PE protection.

Swapping process:

Picking up or putting down swap containers takes place through pneumatic lifting and lowering device of chassis as well as mechanical height adjustment.

Middle and height supports:

Front and back frame segment and container wear linings centered on the frame according to CEN/TC 119/WG. In the front foldable, solid and patent protected middle support HUB 120/350mm. At the reck/middle two telescopic middle supports.

Guidance:

Guidance is provided by six guide rollers on frame end and frame middle. At the rear carrier and frame middle through two guide rollers, as well as guidance through middle supports in frame middle and front carrier. At the rear carrier foldable middle supports with guidance for HUB 350mm.

DIRECT INQUIRY

*Mandatory fields

If you will send us your requests through this contact information, your data will be saved for processing your request and in case of further questions. We will not give your data to others without your permission.

I do agree that my data will be stored and processed internally and will be used for contact information. I do not agree to any further use. I read the notification for data protection and accept this.

Privacy Notice* accepted 



Conception:

Divided swap frame in modular design, for transportation of volume swap bodies with a maximum corner height, as well as short-coupled use of centre-axle trailers up to 18t. Allows transportation of standardized swap containers according to DIN EN 284 for picking up standardized container lengths C 7.150 – C 7.820 and parking heights 970-1320mm. 4 flange-mounted arms HUB 120/350mm and height-adjustable middle supports, wear liners in frame middle.

Surface:

Enduring and high-quality corrosion protection through hot-dip galvanizing of any attachments. Middle supports galvanized and additionally coated in signal yellow.

Locking:

Solid flange-mounted arms with height-adjustable and pneumatic spring supported interlocking devices HUB 120/350mm. Interlocking through 4 pivots. Central front stop C 7.820, with PE protection.

Swapping process:

Picking up or putting down swap containers takes place through pneumatic lifting and lowering device of chassis as well as mechanical height adjustment.

Middle and height supports:

Front and back frame segment and container wear linings centered on the frame according to CEN/TC 119/WG. In the front foldable, solid and patent protected middle support HUB 120/350mm. At the reck/middle two telescopic middle supports.

Guidance:

Guidance is provided by six guide rollers on frame end and frame middle. At the rear carrier and frame middle through two guide rollers, as well as guidance through middle supports in frame middle and front carrier. At the rear carrier foldable middle supports with guidance for HUB 350mm.

DIRECT INQUIRY

*Mandatory fields

If you will send us your requests through this contact information, your data will be saved for processing your request and in case of further questions. We will not give your data to others without your permission.

I do agree that my data will be stored and processed internally and will be used for contact information. I do not agree to any further use. I read the notification for data protection and accept this.

Privacy Notice* accepted 



Product inquiry

Do you need information or support in choosing the right swap body system?

Just ask us!

Downloads

Simply download the documents for the desired swap body system. Do you need further information or documents?

Feel free to ask us!

SDG parts shop

Order Parts and Accessories directly online

We extend our shop offer for you!
Soon you will find here our brand new SDG parts shop.

coming soon - SDG parts shop