SDG HV 120 LBW KT

The flexible BDF
swap body sytem
with tail lift

SDG HV 120 LBW KT is designed for container accommodation with a maximum corner height up to 2900mm. The arms are flange-mounted and allow the pick-up of containers with an adjustable height up to 1120 - 1320mm and lengths C 7.450 – C 7.820. The standard type is equipped with a low coupling for ZAA use and fitted with a tail lift.
{"autoplay":"true","autoplay_speed":"3000","speed":"300","arrows":"false","dots":"false","rtl":"false"}

Suitable container sizes
and loading heights

Chassis base Standard frame
Tires 315/70 R 22,5
Low coupling yes
Loading heights 1120 - 1320 mm
Container lengths C 7.150 - C 7.820
Corner height max. ca. 2900 mm
Tail lift capable tail lift as equipment


Conception:

Divided swap frame in modular design, for transportation of standardized swap containers according to DIN EN 284, as well as short-coupled central axle trailer operation up to 18 t in combination with the installation of an fold-under tail lift. 4 frame parts: arms HUB 100/120mm and middle supports designed for picking up container length C 7.150 – C.7.820 and loading heights 1.020 – 1.320mm.

Surface:

Enduring and high-quality corrosion protection through hot-dip galvanizing of any attachments. Middle supports completely galvanized and coated in signal yellow color.

Locking:

Solid flange-mounted arms with height-adjustable interlocking device and HUB 100/120mm. System lengths compliant and front-flush container pick-up C 7.820 thanks to double locks (8 pivot pins). Central front stop, with PE protection for container lengths C 7.820. Foldable front stop for C 7.450 container lengths.

Swapping process:

Picking up or putting down swap containers takes place through pneumatic lifting and lowering device of chassis as well as by mechanical height adjustment with lifting height 100/120mm.

Middle and height supports:

Middle frame segments with with two middle supports, foldable from the outside. Four extremely robust central supports, centered on the rear module, movable from outside.

Guidance:

Guidance is provided by two guide rollers on frame end, as well in height-adjustable driving height through guidance at the middle supports.

DIRECT INQUIRY

*Mandatory fields

If you will send us your requests through this contact information, your data will be saved for processing your request and in case of further questions. We will not give your data to others without your permission.

I do agree that my data will be stored and processed internally and will be used for contact information. I do not agree to any further use. I read the notification for data protection and accept this.

Privacy Notice* accepted 



Conception:

Divided swap frame in modular design, for transportation of standardized swap containers according to DIN EN 284, as well as short-coupled central axle trailer operation up to 18 t in combination with the installation of an fold-under tail lift. 4 frame parts: arms HUB 100/120mm and middle supports designed for picking up container length C 7.150 – C.7.820 and loading heights 1.020 – 1.320mm.

Surface:

Enduring and high-quality corrosion protection through hot-dip galvanizing of any attachments. Middle supports completely galvanized and coated in signal yellow color.

Locking:

Solid flange-mounted arms with height-adjustable interlocking device and HUB 100/120mm. System lengths compliant and front-flush container pick-up C 7.820 thanks to double locks (8 pivot pins). Central front stop, with PE protection for container lengths C 7.820. Foldable front stop for C 7.450 container lengths.

Swapping process:

Picking up or putting down swap containers takes place through pneumatic lifting and lowering device of chassis as well as by mechanical height adjustment with lifting height 100/120mm.

Middle and height supports:

Middle frame segments with with two middle supports, foldable from the outside. Four extremely robust central supports, centered on the rear module, movable from outside.

Guidance:

Guidance is provided by two guide rollers on frame end, as well in height-adjustable driving height through guidance at the middle supports.

DIRECT INQUIRY

*Mandatory fields

If you will send us your requests through this contact information, your data will be saved for processing your request and in case of further questions. We will not give your data to others without your permission.

I do agree that my data will be stored and processed internally and will be used for contact information. I do not agree to any further use. I read the notification for data protection and accept this.

Privacy Notice* accepted 



Product inquiry

Do you need information or support in choosing the right swap body system?

Just ask us!

Downloads

Simply download the documents for the desired swap body system. Do you need further information or documents?

Feel free to ask us!

SDG parts shop

Order Parts and Accessories directly online

We extend our shop offer for you!
Soon you will find here our brand new SDG parts shop.

coming soon - SDG parts shop